Operation - Miele KMDA 7272 FR-A Operating And Installation Instructions

Operation

Operation
This ceramic glass hob is equipped with
electronic sensor controls which react
to finger contact. For safety reasons, in
order to switch the appliance on, the
On/Off  sensor control needs to be
touched for a little longer than the other
sensors.
Each time a sensor control is activated,
an audible signal sounds.
When the hob is switched off, only the
printed symbols for the On/Off 
sensor control and the numerical dis-
play for setting the power levels are vis-
ible. More sensor controls light up when
the hob is switched on.
In order to set or alter a power level, the
cooking zones must be "active". To ac-
tivate a cooking zone, touch the display
for the relevant cooking zone. The rel-
evant cooking zone display will appear
brighter when touched. While the dis-
play is brighter, the cooking zone is
"active" and you can set a power level
or time.
Exception: if only one of the cooking
zones is in operation, you can alter the
power level without activating the cook-
ing zone.
34

Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered, this could cause them to
fail to react, to activate a function or
even to switch the appliance off
automatically (see "Safety features –
Safety switch-off"). Placing hot
cookware on the sensor controls/in-
dicators can damage the electronic
unit underneath.
Keep the sensor controls and indic-
ators clean.
Do not place anything over the
sensor controls or indicators.
Do not place hot cookware over the
sensor controls or indicators.