Table of Contents
Advertisement
Operation
Operating principles
This SmartLine appliance is equipped
with electronic sensor controls which
react to finger contact. For safety
reasons, in order to switch the
appliance on, the On/Off sensor
needs to be touched for a little longer
than the other sensors.
Each time you touch a sensor, an
audible tone sounds.
Only the printed On/Off symbol is
visible when the SmartLine appliance is
switched off. The other sensor controls
light up when the SmartLine appliance
is switched on.
Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered, this could cause them to
fail to react, or may lead to the
appliance inadvertently switching on
even switching off automatically (see
"Safety switch-off"). Placing hot
pans on the sensor controls/
indicators can damage the electronic
unit underneath.
Keep the sensor controls and
indicators clean and do not place
anything on top of them. Do not
place hot pans on them.
20
The Tepan plate has two cooking zones
which can be switched on and
regulated independently of one another.
The entire area can be used when
cooking large quantities of food. For
smaller quantities, the front element can
be used to cook the food whilst the rear
element can be used to keep food
warm with the keeping warm
function .
Advertisement
Table of Contents
