Lpg Gas Connection For Hk; Lpg Gas Connection For Sg - Miele CS 1018 Operating And Installation Instructions

The gas hob is normally suitable for
connection to either Town Gas, Natural
Gas or Liquid Petroleum Gas.
Depending on your country, the gas
hob is supplied ready for connection to
Town Gas, Natural Gas or Liquid
Petroleum Gas (see label on
appliance).
Depending on country, the appropriate
set of jets for conversion to an
alternative type of gas is included with
the hob.
Depending on the country, the gas
governor (MDG ELITRE with model no.
EL-125) comes with the hob.
If the jets you require are not supplied,
please contact your Miele dealer or the
Service Department.
Conversion to another type of gas is
described under "Conversion to another
type of gas".

LPG Gas Connection for HK

Stainless steel braided flexible hose
connection
Please use approval stainless steel
braided flexible tubing bearing EMSD
Approval marking (such as EMSD
APPROVA GTXXXX and gas
accessories and gas cock for
connection from ½ PT connect up to
gas supply point).
Gas connection

LPG Gas Connection for SG

Elbow joint connection
a elbow join
b gasket
c nozzle
d ring
e rubber hose
The gasket depicted above is to
prevent gas leakage. After installation,
turn on the gas supply and use soap
solution (never use naked flame) to
check for gas leakage.
49