Settings - Skoda Amundsen Operating Instructions Manual

›
Press in the Navigation main menu the function key  → Route options →
Dynamic route.
›
Switch on/off the option for the dynamic route.
Dynamic route switched on
Information on traffic obstructions which affect the route are displayed in the
map by means of a coloured symbol (e.g., , , , etc.). Traffic obstructions,
which do not affect the route, are displayed in the map by means of a grey
symbol.
Dynamic route switched off
There is no mention of traffic obstructions on the route. The route passes
through these traffic obstructions.
Note
There may not be any advantage in avoiding the traffic jam if the diversion is
also heavily congested.
Enter route traffic obstruction manually
If a traffic obstruction is detected during route guidance (e.g. traffic jam), this
traffic obstruction be manually entered into the route.
After entering, the unit calculates and provides an alternative route.
Enter traffic obstruction
›
Press in the Navigation main menu the function key  → Congestion ahead.
›
Set the length value of the traffic obstruction by touching the scale and us-
ing the function keys /  or turning the knob  .
The traffic obstruction is shown in red in the map to the right along the route
according to the value set.
Remove traffic obstruction
›
Press in the Navigation main menu the function key  → Cancel "congest.
ahead".

Settings


Introduction
This chapter contains information on the following subjects:
Route options
Map
56
Navigation (Amundsen)
Fuel options
Navigation announcements
Advanced settings
Manage memory
Route options
›
Press in the Navigation menu the function key  → Route options.
Suggest 3 alternative routes - Switch on/off the menu for alternative routes
■
(economical, fast, short)
Route: - Setting the preferred route
■
Economical - Most economic
■
Speed - Fastest
■
Short - Shortest
■
Dynamic route - Switch on/off dynamic route recalculation due to TMC traffic
■
reports
 Avoid motorways - Switch on/off the non-use of motorways in the route
■
calculation
■  Avoid ferries and motorail trains - Switch on/off the non-use of ferries
and motorail trains in the route calculation
 Avoid toll roads - Switch on/off use of toll roads for the route calculation
■
■  Avoid tunnels - Switch on/off use of tunnels for the route calculation
 Avoid routes requiring toll stickers - Switch use of routes requiring toll
■
stickers on/off for route calculation
■ Available toll stickers - Selection of countries for which a valid toll sticker is
required (routes requiring toll stickers are used for route calculation)
Map
›
Press in the Navigation menu the function key  → Map.
Lane guidance - Display of lane guidance on/off
■
■ Show favourites - Switch on/off the display of favourites
Show road signs - Switch on/off the display of traffic signs
■
Show POIs - Switch on/off the display of POIs
■
■ Select categories for POIs - Selection of displayed POIs (max 10 categories)
Show brands for POIs - Switch on/off the display company logos at the POIs
■
Fuel options
56
›
Press in the Navigation menu the function key  → Fuel options.
56
56
57
57
57
