Route Guidance; Map Scale; Map Alignment - Skoda Amundsen Operating Instructions Manual

Change the map orientation
›
Press in the Navigation main menu the function key  in the area
» Fig. 33 on page 48.
The map is oriented to the north or in relation to the direction of travel.
The arrow in symbol  always points to the north.
The map is oriented to the north
The map does not rotate, the vehicle position symbol  rotates.
Map oriented to the direction of travel
The map rotates, the vehicle position symbol  does not rotate.

Map scale

It is possible to change the map scale manually or to turn on the automatic
change of scale.
Symbols of the scale function keys
In the map area » Fig. 33 on page 48 the following context-dependent
D
function keys and information is displayed.
Manually set scale

Automatically adjusted scale

Turn on / off the automatic change of scale

Map view in reduced scale

Current elevation

Manual change of scale
Map scale can be change in the following ways.
›
Turning the control knob  .
›
Touching the screen with two fingers and pulling them apart or closing them
together.
Enabling automatic scaling
›
Press in the Navigation main menu the function key  →  .
The function key  is highlighted in green. The manual scaling switches to au-
tomatic scaling.
The automatic scale is only active as long as the map is centred on the vehicle
position (the function key  or  is not displayed).
50
Navigation (Amundsen)
If the automatic scale is active, the map scale will change automatically de-
pending on the route travelled (motorway - smaller map scale / town larger
D
map scale).
Turn off the automatic change of scale
›
Press in the Navigation main menu the function key  →  .
The function key  is highlighted in white. The automatic scaling changes to
manual change of scale.
The turning off occurs likewise when the map is moved or the map scale is
changed manually.
Map view in reduced scale
›
Press in the Navigation main menu the function key  →  or  →  .
The map scale is reduced for a few seconds and then restored.

Map alignment

The moved map can be centred/aligned to the vehicle, destination or route po-
sition.
In the map area
D
played depending on the map display.
Aligning to the vehicle position (in the 2D map display -  or 3D map dis-

play - )
Alignment to the destination position (in the destination position display -

)
Route alignment (in the route display - )

Route guidance


Introduction
This chapter contains information on the following subjects:
Destination management
Route calculation
graphical driving recommendations
Nav. announcements
Route information
Abort route guidance
» Fig. 33 on page 48 the following function keys are dis-
51
51
52
52
52
53
