Individual Routine Calls - Garmin GPSMAP 4008 Owner's Manual

Vessel Trails on the Navigation Chart
You can view trails for all tracked vessels on the Navigation Chart, the Fishing Chart, the Mariner's Eye 3D
Chart view, and the Radar Overlay. By default, a black dot
a tracked vessel, and a Blue Flag symbol
indicating the path of the vessel also appears.
You must enable the DSC Trails setting in order to view trails for tracked vessels
Note: The Mariner's Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing
Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in
map supports Fishing Charts.
➋
➊
➌
Showing and Setting the Duration of Trails for All Tracked Vessels
Note: The Mariner's Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing
Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in
map supports Fishing Charts.
1. From the Home screen, select Charts.
2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner's eye 3D.
3. Select Menu > other Vessels > DSC > DSC trails.
4. Select the number of hours to show tracked vessels on the chart or 3D chart view.
For example, if you select 4 Hours, all trail points that are less than four hours old appear for all tracked
vessels.

Individual Routine Calls

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call. When setting up an individual routine call from
your chartplotter, you can select the DSC channel on which you want to communicate
transmits this request with your call.
Selecting a DSC Channel
Note: The selection of a DSC channel is limited to those channels that are available in all frequency bands:
6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72. If you select a different
channel, the chartplotter uses that channel for subsequent calls until you call using another channel.
1. From the Home screen, select information > DSC List.
2. Select a vessel or a station to call.
3. Select Review > Call with Radio > Channel.
4. Select a channel.
Making an Individual Routine Call
Note: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed,
the radio will not receive call information.
GPSMAP 4000/5000 Series Owner's Manual
®
➊
indicates the last reported position of the vessel. A black line
➋
Vessel Trail on the Navigation Chart
appears for each previously reported position of
(page
Digital Selective Calling
➌
99).
(page 99). The radio
99