System Information - Garmin GPSMAP 4008 Owner's Manual

System Information

Viewing System Information
See "Viewing System Information"
Viewing the Event Log
The event log shows a list of system events.
From the Home screen, select Configure > System > System information > event Log.
Saving System Information to a Memory Card
You can save system information to a memory card as a troubleshooting tool. A Garmin Product Support
representative may ask you to use this information to retrieve data about the marine network.
1. Insert a memory card into the Data card slot on the chartplotter.
2. Select Configure > System > System information > Save to Card.
3. Remove the memory card.
Restoring the Original Chartplotter Factory Settings
Note: This procedure deletes all settings information you have entered.
1. From the Home screen, select Configure > System > System information > Factory Settings > Reset.
2. Select Yes.
Communication with Wireless Devices
Connecting a Wireless Device
You can allow wireless devices, such as a remote control or an optical mouse, to communicate with the
chartplotter.
From the Home screen, select Configure > Communications > Wireless Devices > New Connections >
Yes.
Disconnecting a Wireless Device
1. From the Home screen, select Configure > Communications > Wireless Devices.
2. Select a wireless device.
3. Select Disconnect.
Garmin Marine Network
The Garmin Marine Network allows you to share data from Garmin peripheral devices with Garmin
chartplotters quickly and easily. You can connect a GPSMAP 4000/5000 series chartplotter to a Garmin
Marine Network to receive data from and share data with other Marine Network-compatible devices and
chartplotters.
Transferring Data over the Garmin Marine Network
See "Chartplotter Data Management"
Configuring Networked Devices
See "Networked Device Configuration"
GPSMAP 4000/5000 Series Owner's Manual
®
(page 3).
(page 60).
(page 62).
Appendix
103