Scheduling Introduction - Hunter 47377 Owner's Manual

Read the scheduling section thoroughly to ensure you understand your scheduling options and
which will best fit with your lifestyle. The following notes should help you with scheduling:
* The schedule time can be set in 15 minute increments, and remains the same for both Heat
and Cool programs.
* The scheduled temperature can be set in increments of 1°F (1°C).
* After 15 minute without a key press, the thermostat will return to the home display screen.
* When setting the schedule time, note the AM / PM indicator.
* At any stage during your scheduling, you can use the
backwards through the steps.
altered all settings.
* Arrows beside each schedule mode and beside heat/cool modes will indicate which ones
are active.
This thermostat has been pre-programmed to provide optimal energy savings. No
programming is necessary. We recommend you run these programs for a few days before
adjusting your programming. If it is necessary to change these settings, use the scheduling
table on the next page to record your new settings. You will also find the default schedule there
as well.
12

Scheduling Introduction

will save any changes, even if you have not scheduled or
Done/
Home
44118-01 • 08/06/2012
or buttons to move forward or
Back
Next