Scheduling; Scheduling Introduction - Hunter 44132 Owner's Manual

5-2 programmable weekdays-weekends
Hide thumbs Also See for 44132:
Table of Contents

Advertisement

Scheduling

Scheduling Introduction

Read the scheduling section thoroughly to ensure you understand your
scheduling options and which will best fit with your lifestyle. The following
notes should help you with scheduling:
• The schedule time can be set in 15 minute increments, and remains the
same for both Heat and Cool programs.
• The scheduled temperature can be set in increments of 1°F (1°C).
• After 15 minutes without a key press, the thermostat will return to the home
display screen and save any changes you have made.
• When setting the schedule time, note the AM / PM indicator.
• At any stage during your scheduling, you can use the
to move forward or backwards through the steps.
changes, even if you have not scheduled or altered all settings.
• Arrows beside each schedule mode and beside heat/cool modes will
indicate which is active.
This thermostat has been pre-programmed to provide optimal energy
savings. No programming is necessary. We recommend you run these
programs for a few days before adjusting your programming. If it is
necessary to change these settings, use the scheduling table on the next
page to record your new settings. You will also find the default schedule
there as well.
12
5
44067-01 • 10/13/2010
or
buttons
Back
Next
will also save any
Done/
Home

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

44127

Table of Contents