Ford TRANSIT Owner's Manual page 80

Ford transit
Hide thumbs Also See for TRANSIT:
Table of Contents

Advertisement

Following a heating cycle we recommend
that you drive your vehicle for at least the
same period of time as the heating cycle.
This prevents the vehicle battery from
running out of charge.
We recommend you switch the system on
for approximately 10 minutes every month
to prevent the water pump or heater motor
seizing.
The system will only operate if there is a
minimum of 16 liters (3.5 gallons) of fuel
in the vehicle fuel tank and the outside air
temperature is below 59°F (15°C). The
system will not operate if the battery
charge level is low.
Note: When the system is operating,
exhaust fumes will come from under your
vehicle. This is normal.
To program the fuel operated parking heater, scroll to:
Message
Settings
Convenience
Park heater
Select one of the following:
Time 1
Time 2
Once
Heat now
Transit (TTG) Vehicles Built From: 26-01-2015, CG3612en enGBR, Edition date: 12/2014, First Printing
Climate Control
Note: On vehicles with manual climate
control, heating the vehicle interior will
depend on the heater control settings. See
Climate Control (page 73).
Programming the Fuel Operated
Parking Heater
Use the information display controls on
the steering wheel. See Information
Displays (page 62).
Note: The time and date on your vehicle s
clock must be set correctly. See Clock
(page 67).
Note: You must program the time at least
70 minutes before the time you wish to set.
Note: The programmed time is when you
want your vehicle to be warm and ready to
drive, not when the heater turns on.
Action and Description
Press the OK button.
Press the OK button.
Press the OK button.
Allows you to program a heating cycle for each day of the
week. These times will remain stored and the system will
warm up your vehicle at the programmed times.
Allows you to program a second heating cycle for each day
of the week. These times will remain stored and the system
will warm up your vehicle at the programmed times.
Select to set a second heating cycle, for example different
times on different days or twice on the same day.
Allows you to program one heating cycle for a specific day.
Switches the system on immediately.
78

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents