Technical Specifications - Fwd - Ford TRANSIT Owner's Manual

TECHNICAL SPECIFICATIONS - FWD

Capacities
Engine cooling system
Engine lubrication system - including the oil filter
Engine lubrication system - excluding the oil filter
Engine oil top-up - raise the level on the dipstick
from minimum to maximum
Fuel tank - normal capacity
Fuel tank - increased capacity
Diesel exhaust fluid
Windshield and rear window washer system -
including headlamp washer
Specifications
Materials
Name
Engine Oil - 5W-30
Transmission Oil - 75W FE
7U7J-M2C200-BA/CA
Automatic Transmission Oil C-ML5
7U7J-M2C938-AB
Antifreeze Super Plus Premium
4U7J-19544-xxxx
Antifreeze Super Plus Premium Ready Mix
2U2J-19544-xxxx
Brake Fluid DOT 4 LV High Performance
BU7J-M6C65-xxxx
Note: If you are unable to find an engine oil
that meets the specification defined, you
must use an SAE 5W-30 engine oil defined
by ACEA A5/B5 for top-up only.
Use oil and fluids that meet the defined
specification and viscosity grades.
Transit (TTG) Vehicles Built From: 26-01-2015, CG3612en enGBR, Edition date: 12/2014, First Printing
Maintenance
Item
175
3.1 gal (14.1 L)
1.4 gal (6.5 L)
1.4 gal (6.2 L)
0.4 gal (1.5 L)
17.6 gal (80 L)
20.9 gal (95 L)
4.6 gal (21 L)
1 gal (4.5 L)
Specification
WSS-M2C913-D
WSS-M2C200-D2
MERCON® LV
WSS-M2C938-A
WSS-M97B44-D
WSS-M97B44-D2
WSS-M6C65-A2
If you use oil and fluids that do not meet
the defined specification and viscosity
grades this may lead to:
• Component damage which may not be
covered by the vehicle Warranty.
• Longer engine cranking periods.
• Increased emission levels.
Capacity