Jump Starting The Vehicle; To Connect The Booster Cables - Ford TRANSIT Owner's Manual

4. Press the brake pedal, and then press
and hold the button until the engine
starts.
Note: Various system checks are
automatically carried out before the vehicle
will restart. if your vehicle fails to restart
after the third attempt, the system has
detected a fault that requires service. We
recommend you contact an authorized
dealer.

JUMP STARTING THE VEHICLE

WARNINGS
Do not use fuel lines, engine rocker
covers or the intake manifold as
grounding points.
Connect batteries with only the same
nominal voltage.
Always use booster cables with
insulated clamps and adequate size
cable.
Note: Do not disconnect the battery.
Transit (TTG) Vehicles Built From: 26-01-2015, CG3612en enGBR, Edition date: 12/2014, First Printing
Roadside Emergencies
144

To Connect the Booster Cables

A Flat battery vehicle
B Booster battery vehicle
1 Positive connection cable
2 Negative connection cable
1. Position the vehicles so that they do
not touch one another.
2. Switch the ignition off and any
electrical equipment.