5
bizhub C364e/C284e/C224e
Unpacking the drum unit
Tips
-
Your service representative will collect your used Drum Unit. Put it in a black plastic bag and store it
in a box by itself.
-
A Drum Unit may be damaged due to exposure to light. Do not take a Drum Unit out of a black plastic
bag until just before it is to installed.
-
If the replacement time of a Drum Unit other than for black is reached, printing can be continued for-
cibly using black. Tap [Continue], and then select a desired print job.
-
After replacing a Drum Unit, be sure to clean the Print Head Glass for each color. For details on how
to clean the Print Head Glass, refer to page 5-7.
7 CAUTION
Handling toner and Drum Unit
-
Do not throw an Drum Unit into a fire. Doing so may cause hot toner to spray in all directions, which
may cause burn injuries.
-
Be careful not to get the inside of the machine, your clothes, or hands dirty with toner.
-
If any toner does get on your hand, wash it off using water or neutral detergent.
-
If any toner gets into your eyes, immediately wash it out with water and consult your doctor.
5-20
When a message appears to replace consumables or carry out cleaning
bizhub C554e/C454e/C364e/C284e/C224e
5.5