ViewSonic PJ513D-1 Service Manual page 7

4.3 Palletization
5.0 Thermal Specification
5.1 Surface held or touched for short
periods
5.2 Surface which may be touched
5.3 Exhaust Air
6.0 Environmental
6.1 Temperature
6.2 Humidity
6.3 Audible Noise Level
6.4 Altitude
7.0 Regulatory
8.0 Reliability
8.1 MTBF
8.2 Lamp Lifetime
9.0 Power Requirements
9.1 Power Supply (Normal)
9.2 Power consumption
ViewSonic Corporation
72 units by Air;
108 units (pallet A)/72 units (pallet B) by sea
2232 units/40' container, or 1080 units /20' container
Mechanical component temperature at ambience 0~40℃
Normal surface:
Metal < 60°C except screws & terminals
Plastic<65°C except around ventilation (for this model only)
Screw and terminals <55°C
Metal
<70°C
<95°C around ventilation holes
Operating 0~40°C, without condensation
Storage -20~60°C, without condensation
Operating 10~90%RH, without condensation
Storage 10~90%RH, without condensation
Normal mode: 32dBA @ 25°C
Typical
Eco mode: 28dBA @ 25°C
Normal mode: 34BA @ 25°C
Maximum
Eco mode: 30dBA @ 25°C
Operating:
0~6000ft,25°C±5°C
6000ft~10000ft, 25°C±5°C must be operational and the reliability decrease
is acceptable (not guarantee Power, Ballast, DMD and lamp life)
Storage:
0 to +40000ft sea level(-20 °C to 30°C)
Max altitude in 60°C :0-6500ft
Max temperature in 10000ft:53°C
CB, CSA, TUV-GS, CCC, PSB, NOM, Korean-eK, Gost-R,
Safety
Hygiene, SASO, TUV-Argentina, Ukraine, CE
EMC FCC Class B requirements, CE
ESD Qisda ESD Specification
40000 hours except DMD chip, Color wheel, Lamp and Ballast
Normal : 2000 hours (50% brightness maintenance)
Eco: 3000 hours
Adhere to Appendix 3.5
VAC 90 – 264 Auto-switch (50/60Hz), 3 Wire Grounded
Typical 260 W Max.
Standby 5W Max.
4
Plastic
<95°C
Confidential - Do Not Copy
PJ513D-1