i.
Insert Lamp into HLD Lamp and push Lamp forward to touch DTM Lamp of HLD
Lamp (Fig. 1-11)
ii.
To make sure that three datum contact with the lamp well(Fig. 1-12)
iii.
After assemble Lamp to HLD Lamp, Hook "Clip down Lamp" first then Hook "Clip UP
Lamp" on the HLD Lamp to fix Lamp last. (Fig. 1-13、1-14)
iv. Check assembly again and make sure the three datum contact with the lamp.
v.
Assemble Plate Lamp to the HLD Lamp and fasten the screw(Fig. 1-15)
ViewSonic Corporation
Fig. 1-11
Fig. 1-13
Fig. 1-12
Fig. 1-14
37
Confidential - Do Not Copy
DTM of Lamp
PJ513D-1