Printing Does Not Start - Canon Pixma iP110 series Online Manual

Printing Does Not Start

Make sure that the power plug is securely plugged in, then press the ON button
Check1
to turn the printer on.
If you use a battery, make sure that it is charged, then press the ON button to turn the printer on. For details on
how to check it, refer to the battery's instruction manual.
While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing and
remains lit.
Note
• When printing large data such as a photo or graphics, it may take longer to start printing. While the
POWER lamp is flashing, the computer is processing data and sending it to the printer. Wait until printing
starts.
Make sure that the printer is connected to your computer properly.
Check2
When the printer is connected to your computer with a USB cable, make sure that the USB cable is securely
plugged in to the printer and the computer, then check the followings:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult
the reseller of the relay device for details.
• There could also be a problem with the USB cable. Replace the USB cable and try printing again.
When you use the printer over LAN, make sure that the printer is set up to be used over network correctly.
Is the access point mode enabled?
Check3
When you print using a mode other than the access point mode, disable the access point mode in advance.
If you are printing from the computer and there are any unnecessary print jobs,
Check4
delete them.
Deleting the Undesired Print Job
Make sure that your printer's name is selected in the Print dialog.
Check5
The printer will not print properly if you are using a printer driver for a different printer.
Make sure that your printer's name is selected in Printer in the Print dialog.
Note
• To make the printer the one selected by default, select the printer for Default printer.
Restart your computer if you are printing from the computer.
Check6
327