Page 1
Installing Your Printer to the Network for the First Time PIXMA iP110 Windows OS Wireless Setup Using the USB Cable...
Page 2
Installing Your Printer to Your Network for the First Time PIXMA iP110 Windows OS Preparing to Connect My Printer to My Network Network Requirements Notes on Wireless Connection Installing the Drivers & Software...
Page 3
Preparing to Connect the Printer To the Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.
Page 4
Preparing to Connect the Printer To the Network Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer. •...
Setup CD-ROM during restarting. The installation resumes once your computer has restarted. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
Page 6
Installing the Drivers & Software To begin setup of your PIXMA iP110 on your wireless network, insert the Setup CD-ROM* in your computer. The setup program will start automatically. The setup instructions presented in this document describe the “ Wireless Setup Using the USB Cable”...
Page 7
Installing the Drivers & Software Click Next on the initial screen.
Page 8
Connecting to the Network On the following screen, select Wireless LAN Connection, then click Next.
Page 9
Connecting to the Network On the following screen, select Access Point Connection, then click Next.
Page 10
Connecting to the Network Continue following on-screen instructions. On the Printers on Network List screen, check the Setting printer could not be found on the list checkbox and click Next. 10 10...
Page 11
Connecting to the Network Continue to follow on-screen instructions. If the Install .NET Framework screen appears, Click Yes Select Other setup on the Setup Procedure Selection screen (2-1). 11 11...
Page 12
Connecting to the Network Select Wireless Setup Using the USB Cable on the Setup Procedure Selection screen. (2-2). 12 12...
Page 13
Installing the Drivers & Software Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next. *IJ Printer Driver is required and cannot be deselected. We recommend installing My Image Garden and Quick Menu to take full advantage of the printer’s features.
Page 14
Connecting to the Network Carefully follow on-screen instructions. When the Check Printer Settings screen appears, check the Set up the network connection via USB checkbox. Click Next 14 14...
Page 15
Connecting to the Network Connect the USB Cable when the Connect Cable window appears. The window will close once the printer is detected. 15 15...
Page 16
Connecting to the Network << Previous Next >> If the Detected Access Points List* appears, select the one you wish to connect to, enter the network key and click connect. *This screen normally appears if you have multiple access points or multiple access points exist in your immediate area. For details on how to check the Access Point name/network name (SSID) and network key, refer to the manual supplied with your access point or contact its manufacturer.
Page 17
Connecting to the Network << Previous Next >> If the Confirm Connection Access Point* screen appears, verify the information then click Yes *This screen normally appears when you have only one access point...
Page 18
Connecting to the Network Continue following on-screen instructions. When the Setup Completion dialog box appears, click Complete. At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program. 18 18...