Table of Contents
Advertisement
FOR THE BEST RESULTS FOLLOW THESE INSTRUCTIONS:
1.) Remove any earrings etc.
2.) Rub your earlobe around 15 times to increase circulation.
3.) Make sure your ear is dry and keep your hair behind your ear so it dose not interfere.
4.) Clip the sensor to your earlobe as in (Diag. 2)
5.) Use the small clip to attach the wire to your shirt collar or other suitable place.
Allow enough wire spare to move freely without pulling the sensor off your ear. (Diag.3)
CHECK
,
Don t clip the sensor near holes pierced in your ear.
Try to avoid excessive vibration of the sensor or the sensor wire as this can lead to
inaccurate results.
If you are wearing a shirt with a collar attach the clothes clip to your collar.
This will help reduce excessive vibration.
CENTRE OF SENSOR
MIDDLE OF EARLOBE
*
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
PULSE RATE SENSOR
SENSOR
Clip the centre of the sensor
to the middle of the earlobe.
CLOTHES
CLIP
EARLOBE
Clip the clothes clip to your
collar (If you are wearing a
shirt with a collar).
*
Hide quick links:
Advertisement
Table of Contents
