Canon NP6320 Service Manual page 165

2) Remove the inside plate and spring.
3) Change the spring as shown in Table 8-
303.
4) Set the inside plate, and attach the rubber
stopper.
Check that the rubber stoppers are cor-
rectly attached; further, check that the spring
at the rear is correctly set on the fixing behind
the inside plate.
COPYRIGHT © 1999 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Figure 8-309
Inside plate
Figure 8-310
Inside plate
Spring
Figure 8-311
Hooked
Spring fixing
Claw
Cassette
8-15