Canon NP6320 Service Manual page 131

6. Mounting the Thermistors
Make sure that the sensor face of the ther-
mistor is in even contact with the surface of
the upper fixing roller.
Note:
The position of the thermistor need not
be adjusted; if the contact is not even,
make sure that the thermistor spring is
not deformed.
7. Attaching the Thermoswitch
Make sure that the sensor face of the
thermoswitch is in even contact with the sur-
face of the upper fixing roller.
Note:
The position of the thermoswitch need
not be adjusted; if the contact is not
even, make sure that the thermoswitch
spring is not deformed.
COPYRIGHT © 1999 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
Thermistor spring
Upper roller
Figure 6-215
Leaf spring
Upper roller
Figure 6-216
Thermistor
Thermoswitch mount
Thermoswitch
6-11