Canon NP6320 Service Manual page 113

2. Feeder Belt
1) Detach the feeder assembly.
2) Remove the two screws [1], and detach
the rail cover [2] found at the front.
3) Remove the two screws [3] found at the
front that hold the corona assembly rail
[4] in place.
4) Remove the three screws [5], and detach
the terminal holder [6] found at the rear.
COPYRIGHT © 1999 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Figure 5-320
Figure 5-321
[5]
Figure 5-322
[1]
[2]
[4]
[3]
[6]
5-19