Canon NP6320 Service Manual page 128

CHAPTER 6 FIXING SYSTEM
8) Remove the E-ring [1], and detach gear A
[2].
9) Remove the C-ring [3], and detach two
gears B [4].
10) Remove the two screws [1], and detach
the bushing [2].
Note:
The bushing is pushed up from below. If
it is difficult to detach, try pushing the
upper fixing roller to the bottom to fa-
cilitate detachment.
11) Push the pressure spring of the lower fix-
ing roller using a screwdriver [1], and de-
tach the upper fixing roller [2].
12) Detach the lower fixing roller [3].
6-8
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
COPYRIGHT © 1999 CANON INC.
[2]
Figure 6-211
[1]
Figure 6-212
[1]
Figure 6-213
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[4]
[3]
[1]
[1]
[2]
[2]
[3]