Gigabyte GA - 586S2 User Manual page 65

GA-586S2
Enabled Activate automatically when the system boots up causing
a warning message to appear when anything attempts to
access the boot sector or hard disk partition table.
Disabled No warning message appears when anything attempts to
access the boot sector or hard disk partition table.
•
CPU Internal Cache / External Cache
These two categories speed up memory access. However, it depends on
CPU / chipset design.
The default value is Enabled.
Enabled Enable cache function.
Disabled Disable cache function.
•
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on
the computer. If it set to Enable, BIOS will skip some check items during
POST.
The default value is Enabled.
Enabled Enable quick POST.
Disabled Normal POST.
•
Boot Sequence
This category determines which drive computer searches first for the
disk operating system (i.e., DOS).
The default value is A,C,SCSI.
A,C,SCSI System will first search for floppy disk drive then
hard disk (C) drive and SCSI drive.
C,A,SCSI System will first search for hard disk (C) drive then
floppy disk drive and SCSI drive.
C,CDROM,A System will first search for hard disk (C) drive then
CDROM drive and floppy disk drive.
CDROM,C,A System will first search for CDROM drive then hard
4-11