Gigabyte GA - 586S2 User Manual page 33

III. Top Performance Test Setting:
Users have to modify the value for each item in chipset features as follow:
Note:60ns EDO-60ns DRAM is necessary for top performance setting.
Chipset features setup
Auto Configuration
L2 (WB) Tag bit Length
SRAM Back-to-Back
NA# Enable
Starting Point of Paging
CAS# Pulse Width (FP)
CAS# Pulse Width (EDO)
RAMW# Assertion Timing
CAS Precharge Time (FP)
CAS Precharge Time (EDO)
SDRAM CAS Latency
SDRAM WR Retire Rate
SDRAM Wait State Control
Enhanced Memory Write
Read Prefetch Memory RD
CPU to PCI Burst Mem. WR
MA Current Rating
Video BIOS Cacheable
Memory Hole at 15M-16M
ROM PCI / ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled Refresh Cycle Time (us)
RAS Pulse Width Refresh
: 8bit
: Enabled RAS Precharge Time
: Disabled RAS to CAS Delay
: 1T CPU to PCI Post Write
ISA Bus Clock Frequency
: 2T
: 1T
: 3T
: 1T/2T
: 1T/2T
: 2T
: X-1-1-1
: 0WS
: Disabled
: Enabled
ESC : Quit
: Disabled
F1 : Help
: Low
F5 : Old Values
: Enabled
F6 : Load BIOS Defaults
: Disabled
F7 : Load Setup Defaults
33
Table of Contents
: 15.6
: 6T
: 3T
: 3T
: Disabled
: PCICLK/4
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color