Standby Screen; Handset Display Icons - BT Graphite 3500 User Manual

Standby screen

Internal call
Flashes to indicate an internal
call is being made.
On when an internal
call is in progress.
Handset name
Menu
Use with Left soft key
to open main menu
and confirm options

Handset display icons

Indicates signal link.
Flashes when handset is not registered
or is out of range of the base.
Displayed when on a call.
Flashes when there is an incoming call.
Handsfree speaker in use.
Icon flashes slowly when there is a new
answer machine message(s).
Icon flashes fast when the answer
machine memory is full.
Icon is steady to indicate the answer
machine is on.
Icon disappears when the answer
machine is set to off.
Phonebook list open.
This feature requires subscription to your network provider's Caller Display service.
*
A fee may be payable.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
9881 Graphite 3500 UG [1].indd 10
Internal Call
HANDSET
Back
Use with Right soft key to
return to previous menu or
cancel current action
1
Handset number
Clear
Use with Right
soft key to clear
characters in entry
mode and mute the
microphone.
Indicates there are new number(s)
in the Calls list*.
Fully charged – the 3 bars will all be on.
Medium charge – 2 bars will be on.
Low charge – first bar will be on.
Empty.
Displayed when alarm has been set.
Indicates the keylock is switched on.
Displayed when handset ringer is
set to off.
Indicates more options are available,
by scrolling up or down.
10
13/9/10 16:30:13