Mitsubishi city multi PKFY-08NAMU-A Technical & Service Manual page 34

8-6. TIMER operation
A
2 1
1
D A BC
3 2
1) Set the current time
1 Press CLOCK-ON-OFF button to display the "current time" A.
Remote
(
"current
CLOCK
controller
time"
display A
2 Each time you press
increments of one minute. Each time you press
the time decreases in increments of one minute.
• Press and hold the button to rapidly change the time.
• The time changes in increments of one minute
in units of hour; in this order.
• Approximately ten seconds after pressing the button, the
display on the remote controller will turn off.
The example shows a timer set for operation start at 8:00 and
end at 17:00.
2) set the mode to continuous as follows
1 Press TIMER button to display
3) Set the time to start the unit as follows
2 Press CLOCK-ON-OFF button to display B ON.
3 Press
button to set the time that you want the
unit to start. The start time is displayed at A.
4) Set the time to stop the unit as follows
2 Press CLOCK-ON-OFF button to display C OFF.
3 Press
button to set the time that you want the
unit to stop. The stop time is displayed at A.
5) Set the mode to timer as follows
1 Press TIMER button to display
OC292-32
) (
( ) "timer end
"timer start
TIMER
TIMER
time"
time"
button, the time increases in
D.
TIMER
D.
TIMER
)
No display
button,
ten minutes