Transparencies - Lexmark Optra C710 User Manual

Transparencies

100
Chapter 6: Media guidelines
For best results, use the following Lexmark transparencies with
your printer:
Recommended transparencies
Part number
12A5150
12A5151
These transparencies are designed to provide optimal print qual-
ity when used with your printer. Using other transparencies
designed for laser printers may yield unpredictable results and
possibly cause damage to your printer.
Transparencies must be able to withstand temperatures of 180°C
(365°F) without melting, discoloring, offsetting, or releasing
hazardous emissions.
To order transparencies in the U.S., call 1-800-438-2468. In
other countries, see the table on page 114 for a listing of phone
numbers.
Changing the Paper Type
Always set the Paper Type to Transparency when printing trans-
parencies. The printer will adjust the fuser temperature and
engine speed to ensure the best possible print quality. When you
print transparencies, you will experience a slight delay before
printing starts as the printer warms the fuser to the higher tem-
perature. Black and white transparencies print at approximately
8 ppm and color transparencies print at approximately 1.8 ppm.
Size
Letter
A4