Recycling Used Supplies; Conserving Supplies; 2-Color Draft; Black And White - Lexmark Optra C710 User Manual

Recycling
used supplies
Note:
Lexmark does not rec-
ommend refilling used print car-
tridges or purchasing refilled
cartridges from a third party.
Print quality and printer reliability
cannot be guaranteed if you do.
The printer warranty does not
cover damage caused by using
refilled cartridges.
Conserving
supplies

2-Color Draft

Black and White

Lexmark's Operation ReSource
ipate in a worldwide recycling effort at no cost to you.
Simply package your used print cartridges, fuser, or trans-
fer belt in the shipping box used for the replacement sup-
ply. Follow the instructions on the outside of the box to
send the used supply back to Lexmark.
If a prepaid shipping label is not available for your coun-
try, contact the place where you bought your printer for
additional recycling information.
There are several steps you can take to extend the life of
your printer supplies and reduce overall printing costs.
You can reduce the amount of toner you use for each print
job by printing drafts of color documents in 2-Color Draft
mode or black and white.
When you select 2-Color Draft, the printer only uses the
black and cyan colors to print your document. This can
reduce the color toner applied to each page when you are
printing multi-color drafts. This setting can significantly
cut the cost of printing color drafts and increase print
speed.
If you're printing drafts of a color document, or you're
printing a color document that you want to photocopy, set
Color Correction to Black and White. Your document
prints in shades of gray suitable for reviewing or photo-
Chapter 7: Recycling used supplies
SM
program lets you partic-
119