Paper Sizes - Lexmark Optra C710 User Manual

Paper source specifications
Source Media
Standard tray Paper
(Tray 1) Transparencies
Optional trays Paper
(Tray 2, or 3)
Multipurpose Paper
feeder
Transparencies
Labels
Envelopes
1
For 20 lb paper, unless otherwise noted.
Note: The printer can only duplex print A4 and letter size paper.

Paper sizes

96
Chapter 6: Paper sizes
Sizes
A4, B5, letter, legal, executive
A4, B5, letter, legal,
executive
Supports all standard sizes
listed in the "Paper size speci-
fications" and "Envelope size
specifications" tables
on page 97.
Supports any odd-size paper
within the following
dimensions (width x length):
Minimum: 70 x 127 mm
(2.75 x 5.0 in.)
Maximum: 216 x 356 mm
(8.5 x 14 in.)
Your printer supports a wide variety of paper sizes. See the
"Paper size specifications" table on page 97 for details. Refer to
page 99 for illustrations of proper paper orientation.
The printer determines the size paper loaded in the trays by the
position of the rear paper guide. Since the printer can only rec-
ognize letter, A4, B5, executive and legal size paper, you must
decide which paper sizes you want your trays to support. Then
choose the appropriate setting from the Size Detection menu
item. You can still load the paper sizes you don't select in the
multipurpose feeder.
Weight Capacity
2
60–90 g/m 250 sheets
(16–24 lb) 100 transparencies
2
75–90 g/m 250 sheets (per tray)
(20–24 lb)
2
60–135 g/m 50 sheets
(16–36 lb)
30 transparencies
30 label sheets
9 envelopes
Card stock:
30 card stock sheets
2
163 g/m
(90 lb)
1
Print side
Face up
Face up
Face down