Table of Contents
Advertisement
Note
This feature should be used
only if the panel experiences
consistent trouble reporting
to the central station. Other-
wise, leave this option off.
Note
This option works in con-
junction with Option 75: VOX
Mic Gain. It is important to
follow the setting recommen-
dations as described to
achieve acceptable opera-
tion.
Euro Simon Security System
Option 73: Modem Sensitivity (Default = off)
Determines whether the modem sensitivity is set to normal (off) or high (on).
¾
To turn on Modem Sensitivity, press:
Add—Option #—73—DONE.
¾
To turn off Modem Sensitivity, press:
Delete—Option #—73—DONE.
Option 74: Silent Panel Police Panic (Default = off)
Determines whether pressing the panel police panic button causes an audible (off) or silent (on)
alarm.
¾
To turn on Silent Panel Police Panic, press:
Add—Option #—74—DONE.
¾
To turn off Silent Panel Police Panic, press:
Delete—Option #—74—DONE.
Option 75: VOX Mic Gain (Default = 14)
Sets the mic gain (sensitivity) that triggers the voice-activated switching (VOX).
Room size, acoustics, and furnishings where the panel or Interrogator 200 are located will influ-
ence the setting. The available settings are 01 (low) - 64 (high). Entries must be 2 digits.
For panels with a built-in microphone, a setting of 14 is recommended. For systems using the
Interrogator 200, a setting of 7 should be used.
¾
To set VOX Mic Gain, press:
Add—Option #—75—01 - 64—DONE.
¾
To reset Vox Mic Gain (return to default), press:
Delete—Option #—75—DONE.
Option 76: VOX Gain Range (Default = 64)
Sets the gain range for the voice-activated switching (VOX).
The available settings are 01 (low) - 64 (high). Entries must be 2 digits.
For best results, this option should be set equal to or greater than Option 75: VOX Mic Gain. For
panels with a built-in microphone, this option should be set to the default value.
¾
To set VOX Gain Range, press:
Add—Option #—76—01 - 64—DONE.
¾
To reset VOX Gain Range (return to default), press:
Delete—Option #—76—DONE.
Option 77: Manual Mic Gain (Default = 64)
Determines the gain level (sensitivity) during 2-way audio sessions, when Option 33: Audio Ver-
ification is set to 0 or 1 (Speak).
Room size, acoustics, and furnishings where the panel or Interrogator 200 are located will influ-
ence the setting. The available settings are 01 (low) - 64 (high). Entries must be 2 digits.
For panels with a built-in microphone, a setting of 64 is recommended. For systems using the
Interrogator 200, a setting of 20 should be used.
¾
To set Manual Mic Gain, press:
Add—Option #—77—01 - 64—DONE.
¾
To reset Manual Mic Gain (return to default), press:
Delete—Option #—77—DONE.
34
Advertisement
Table of Contents
