Table of Contents
Advertisement
Note
The downloader code
should always be changed
from the default setting to
avoid competitor theft.
19
¾
To turn off Phone Lock, press:
Delete—Option #—08—DONE.
Option 09: Downloader Code (Default = 12345)
Lets you set a unique 5-digit code that is required for initiating ToolBox sessions (on) or sets
the code to its default (off).
The code must be 5 digits long and can range from 00000 to 99999. The Downloader Code
must match the downloader access code in the ToolBox account to perform ToolBox sessions.
¾
To set Downloader Code, press:
Add—Option #—09—5-digit code—DONE.
¾
To delete Downloader Code (return to default), press:
Delete—Option #—09—DONE.
Option 10: Entry Delay (Default = 030 sec.)
Determines how much time the user has to disarm the system after entering the armed premises
through a designated delay door, before an alarm occurs. Beeps sound during the entire delay
time to remind the user to disarm the system.
When turned on, the Entry Delay can be set from 005-254 seconds (030-254 if SIA Limits
Option 69 is on). All entries must be 3 digits. When turned off, the Entry Delay is set to 005
seconds.
¾
To set Entry Delay, press:
Add—Option #—10—3-digit delay time—DONE.
¾
To reset Entry Delay (return to default), press:
Delete—Option #—10—DONE.
Option 11: Exit Delay (Default = 060 sec.)
Determines how much time the user has to leave the premises through a designated delay door
after arming the system. Beeps sound after arming the system to remind the user to leave the
armed premises.
If a delay door is opened after the Exit Delay expires, the Entry Delay begins. If the user arms
the system with No Delay and opens a delay door after the Exit Delay expires, an alarm occurs.
When turned on, the Exit Delay can be set from 005-254 seconds (045-254 if SIA Limits
Option 69 is on). All entries must be 3 digits. When turned off, the Exit Delay is set to 005 sec-
onds.
¾
To set Exit Delay, press:
Add—Option #—11—3-digit delay time—DONE.
¾
To reset Exit Delay (return to default), press:
Delete—Option #—11—DONE.
Option 12: Phone Mod 1 (Default = 0)
Determines the primary phone number (Option 4) report content and reporting format.
The following table describes the choices.
Setting #
0
1
2
3
Alarms include: Fire, Intrusion, Emergency, Silent, and Alarm Cancels.
Phone Mod 1
Content
Format
All
SIA
All
Contact ID
Alarms only
SIA
Alarms only
Contact ID
Euro Simon Security System
Advertisement
Table of Contents
