Appletalk; Finding The Default Appletalk Name; Creating A Desktop Printer Icon - Lexmark E320/E322 User Reference Manual

5
Try printing from some other application. If the job prints from the second application, you've
narrowed the problem to the first application. Make sure you are using the current version of
the driver for the problem application.
6
Place a job in the queue using a Novell utility such as PCONSOLE.

AppleTalk

Finding the default AppleTalk name

Your printer ships with a default AppleTalk name that appears in the Chooser. To find the default
AppleTalk name, press the operator panel button to print a network setup page. Look under the
AppleTalk heading for the printer name.

Creating a desktop printer icon

Each Macintosh user on the AppleTalk network who wants to use the printer should do the following
steps.
1
In the Chooser, select the LaserWriter 8 driver.
2
If you have a routed network, there is a list of zones you can select from. The new printer is in
the default zone for the network. Select this zone. If you don't know which zone to select, look
on the network setup page under AppleTalk for Zone.
3
Select the new printer. If you don't know which printer to select, look on the network setup
page under AppleTalk. The default name of the printer is listed beside Name.
4
Click Create.
5
If prompted to select a PPD (PostScript Printer Description), you need to install the proper
PPD from the drivers CD. To do this, launch the CD, click Installer, select the appropriate PPD
for your printer, and then click Install. Go back to the Chooser and try to create the new printer
again.
Note: A PPD describes the printer or printer family. For example, the PPD lists which
options are valid for the printer.
6
Look for an icon in the Chooser next to the printer name. This means you have successfully
set up the new printer and a new desktop printer icon is on your desktop.
7
In the Chooser, select the printer you want to use and then close the Chooser window.
106