Error Conditions - Lexmark E320/E322 User Reference Manual

Error conditions

What shows on the four
indicator lights
binary 12 (for 0.25 sec),
binary 3 (for 0.25 sec),
repeat continuously.
binary 15 (for 0.25 sec),
binary x (for 0.25 sec),
repeat continuously.
where x could be 0, 1, 2, 3,
4, 5, 6, 7, 8, or 9
binary 9 (for 1 sec)
binary 6 (for 1 sec)
repeat continuously.
Menu
Test
Description
Serious failure.
The print server is unable
to recover.
POST error
The print server is not
connected to the
network.
Cause and solution
Unrecoverable software error. Call Customer
Support.
Power-on self test error. During start-up, a hardware
failure was detected on the print server.
• Press the Menu and Test buttons simultaneously
to reset the print server.
• If the problem reoccurs, call Customer Support.
Print a network setup page and look under Status. If
it shows the printer server is not connected:
• Make sure the Ethernet cable is firmly plugged in.
• Try another wall outlet.
110