Related Manuals for Clarity BT914HS
Summary of Contents for Clarity BT914HS
- Page 1 User Guide BT914HS Amplified Big Button Cordless Phone - Additional Handset for BT914 (sold separately)
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Congratulations on purchasing your new Clarity product. Before using this telephone, please read Important Safety Instructions. WARNINGS: PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. To maintain the compliance with the FCC’s RF exposure guideline, place the base unit at least 20 cm from nearby persons. - Page 4 IMPORTANT SAFETY INSTRUCTIONS 6. Unplug this telephone from the wall outlets before clean- ing. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 7. Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS 13. To reduce the risk of electrical shock, do not take this phone apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.
- Page 6 21. Discontinue use of product and contact Clarity if the prod- uct overheats, has a damaged cord or plug, if the product has been dropped or damaged or if the product has come into contact with liquids.
- Page 7 Use the phone on the lowest volume setting as possible. Limit the amount of time you use the telephone at high volume levels. 25. If you experience a skin irritation after using this product, discontinue use and contact Clarity. SAVE THESE INSTRUCTIONS...
-
Page 8: Battery Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS BATTERY SAFETY INSTRUCTIONS WARNING: Dispose of used batteries according to the instructions. 1. Do not dispose of the battery in a fire as it may explode. Check with local codes for possible special disposal in- structions. 2. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes and skin. -
Page 9: Installation Location
PACKAGING CONTENTS LOCATION Package contains the following items: • Handset Charger • AC power adapter for Charger • Cordless Handset • (2) Rechargeable batteries for cordless handset • User Manual • Warranty/FCC Requirements booklet Installation Location For maximum coverage and reduce the interference, here are some guidelines you should consider when you place the base unit, •... -
Page 10: Connecting The Charger
CONNECTING CHARGER If the reception for a base unit location is not satisfactory, move it to another location for better reception. Depending on the surrounding conditions as well as spatial and structural factors, the range may be reduced. The range indoors is nor- mally less than outdoors. -
Page 11: Install The Batteries
INSTALL THE BATTERIES Note: • Use only the batteries provided or equivalent. • If the handset will not be used for a long time, disconnect and remove the batteries to prevent possible leakage. • To purchase replacement batteries, go to any store that sells batteries: NiMH AAA 1.2V 500mAh. -
Page 12: Battery Status
BATTERY STATUS Battery Battery status Action indicators The screen is The battery has Charge without blank, or shows no charge or very interruption (at Put in charger little charge. The least 30 minutes) and the battery handset cannot be symbol flashes. used. -
Page 13: Operating Time
BATTERY STATUS When it is fully charged, you can expect the following perfor- mance: Operations Operating Time While in handset use Seven hours (talking*) While in speakerphone mode Three hours (talking*) While not in use (standby**) Five days *Operating times vary depending on your actual use and the age of the battery **Handset is not charging or in use. -
Page 14: Registering The Handset
Register your handset to BT914 (purchased separetely) You can add new cordless handsets (BT914HS) to your tele- phone system (purchased separately). Your telephone system supports a maximum of five handsets. -
Page 15: To Register A Handset
REGISTERING THE HANDSET To register a handset: • Place the new/non-registered handset in the telephone base. The handset shows Registering… o Do not place the handset in the charger; place it in the telephone base. The handset shows Registered and you hear a beep when the registration process completes. -
Page 16: Technical Details
TECHNICAL DETAILS Transmit DECT frequency: 1921.536-1928.448 MHz frequency Bluetooth frequency: 2402.000-2480.000 Channels DECT: 5 Bluetooth: 79 Nominal Maximum power allowed by FCC and IC. effective Actual operating range may vary according to range environment conditions at the time of use. Power re- Handset: Two 1.2V Ni-MH 500 mAh quirements... - Page 17 TECHNICAL DETAILS The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Clarity, a division of Plantronics, is under license. Clarity, a division of Plantronics, is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
- Page 18 Chattanooga,TN 37416 Tel: 800-426-3738 Fax: 800-325-8871 E-mail: claritycs plantronics.com Website: www.clarityproducts.com ©2014 Clarity, a Division of Plantronics, Inc. All rights reserved. Clarity, BT914, BT914HS, Smart for Seniors, are trademarks or registered trademarks of Plantronics, Inc. Rev. F (10-14) Printed in China...