Using hands-free phoning
Dialing from the map
You can make a call by selecting the icon of a
registered location or a POI icon from the map
screen.
p You cannot make a call to locations or POIs
that have no phone number data.
1
Scroll the map, and place the cursor on
an icon on the map.
2
Touch
.
The "Detailed POI Information" screen ap
pears.
3
Touch [Call] to make a call.
To cancel the call after the system starts dial
ing, touch
.
4
Touch
to end the call.
Receiving a phone call
You can perform hands free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound.
If "Auto Answer Preference" is set to "Off",
answer the call manually. Answering is avail
able if any screen is displayed, such as the
map screen or the setting screen.
p You can set this navigation system to auto
matically answer incoming calls.
= For details, refer to Answering a call
automatically on page 74.
p The registered name appears if the phone
number of the received call is already regis
tered in "Contacts".
p Depending on the caller ID service, the
phone number of the received call may not
be displayed. "Unknown" appears instead.
1
To answer an incoming call, touch
The operation menu during a call appears.
# Touch [Vol –] or [Vol +].
You can adjust the ring tone volume.
# Touch
to reject an incoming call.
p The rejected call is recorded in the missed
call history list.
= For details, refer to Dialing from the history
on page 69.
2
Touch
to end the call.
The call ends.
p If the voice on the other end of the call is
too quiet to hear, you can adjust the volume
of the received voice.
= For details, refer to Setting the Volume
for Guidance and Phone on page 163.
p You may hear a noise when you hang up
the phone.
# Touch [Vol –] or [Vol +].
You can adjust volume when you are talking.
# Touch [Close Menu].
The operation menu during call is minimized.
To display the menu again, touch
Chapter
12
.
.
71
En