Ejecting An Sd Memory Card (For Avic Z120Bt) - Pioneer AVIC-Z120BT Operation Manual

Chapter
02 Basic operation
CAUTION
! Do not press the h button when an SD mem
ory card is not fully inserted. Doing so may da
mage the card.
! Do not press the h button before an SD mem
ory card has been completely removed. Doing
so may damage the card.
1 Press the h button.
The "Monitor Setup" screen appears.
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up
side and press the card until it clicks and com
pletely locks.
4 Press the h button.
The LCD panel closes.
p If data related to map data, such as custo
mized POI data, is stored on the SD mem
ory card, the navigation system restarts.
16
En
Ejecting an SD memory card
(for AVIC-Z120BT)
p This section describes operations for AVIC
Z120BT.
1 Press the h button.
The "Monitor Setup" screen appears.
2 Touch [Eject SD].
The LCD panel opens.
p Touch [Yes] if the message indicating that
the flap opens after the navigation system
restarts appears.
The navigation system restarts, and then the
LCD panel opens.
3 Press the middle of the SD memory
card gently until it clicks.