Setting The Volume For Guidance And Phone; Changing The Preinstalled Splash Screen - Pioneer AVIC-Z120BT Operation Manual

Pioneer avic-z120bt; avic-x920bt flash memory multimedia av navigation receiver
Hide thumbs Also See for AVIC-Z120BT:
Table of Contents

Advertisement

Customizing preferences
4
Touch [+] or [–] to set the speed.
p The estimated time of arrival is not necessa
rily estimated based on this speed value.
5
Touch [OK].
The settings are completed.
Setting the Volume for
Guidance and Phone
The sound volume for the navigation can be
set. You can separately set the volume of the
route guidance and the beep sound.
Display the "System Settings" screen.
1
= For details, refer to Displaying the "System
Settings" screen on page 161.
2
Touch [Volume].
The "Volume Settings" screen appears.
3
Touch [+] or [–] to set their volume.
On this screen, you can operate the following
items.
! Guidance
This setting controls the guidance volume
of navigation.
p When set to
When set to
! Phone Ringtone
This setting controls the incoming ring tone
volume.
, guidance is output.
, no guidance is output.
! Phone Voice
This setting controls the incoming voice vo
lume.
p "Phone Ringtone" and "Phone Voice" ad
justments are related to the cellular phone
featuring Bluetooth technology. No adjust
ment is needed when the cellular phone
featuring Bluetooth technology is not con
nected.
p Volume of the AV source is adjusted by the
VOL (+/–) button.
= For details, refer to Checking part names
and functions on page 12.
# Touch the key next to "Beep".
Each time you touch the key changes that set
ting.
! On (default):
A beep sounds.
! Off:
The beep sound is muted.
# Touch the key next to "VR Beep".
Each time you touch the key changes that set
ting.
! On (default):
Voice recognition beep is enabled.
! Off:
Voice recognition beep is disabled.
4
To finish the setting, touch [OK].
Changing the preinstalled
splash screen
You can change the splash screen to the other
images preinstalled in the navigation system.
Display the "System Settings" screen.
1
= For details, refer to Displaying the "System
Settings" screen on page 161.
2
Touch [Splash Screen].
The "Select Splash Screen" screen appears.
3
Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
Chapter
31
163
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-x920bt

Table of Contents