Pioneer AVIC-Z120BT Operation Manual page 247

(~I_ns_t_a_lI_at_i_o_n ~)
"i
For AVIC-Z120BTusers
• Do not install this navigation system in a
position where the open ing of the LCD
panel is obstructed by any obstacles, such
as the shift lever, Before installing this navi-
gation system, be sure to leave sufficient
space so that the LCD panel does not ob-
struct the shift lever when it is fully opened,
This may cause interference with the shift
lever, or a malfunction of the mechanism of
this navigation system, ~
Installing this navigation
system
Installation notes
• Do not install this navigation system in
places where it may become subject to
high temperatures or humidity, such as:
- Places close to a heater, vent or air con-
ditioner,
- Places exposed to direct sunlight, such
as on top of the dashboard,
- Places that may be splashed by rain, for
example close to the door,
• Install this navigation system in an area
strong enough to bear its weight. Choose a
position where this navigation system can
be firmly installed, and install it securely, If
this navigation system is not securely in-
stalled, the current location of the vehicle
cannot be displayed correctly,
• Install the navigation unit horizontally on a
surface within 0 degrees to 30 degrees tol-
erance (within 5 degrees to the left or
right), Improper installation of the unit with
the surface tilted more than these toler-
ances increases the potential for errors in
the location display, and might otherwise
cause reduced display performance,
1/
• When installing, to ensure proper heat dis-
persal when using this unit, make sure you
leave ample space behind the rear panel
and wrap any loose cables so they are not
blocking the vents,
Dashboard
Leave ample space
En
aD