Lexmark 4227 User Manual page 75

To load an envelope:
a
Place a single envelope against the left paper guide, with
the top edge first, print side up.
b
Move the right paper guide so that it aligns with the right
edge of the envelope.
Address added
to show correct
orientation.
The Paper Empty/Add Paper message disappears.
• If Auto Cut Sheet Load is On (factory default), the paper
feeds automatically to the TOF position. For help, see
"Setting Auto Cut Sheet Load" on page 64.
• If Auto Cut Sheet Load is Off, press FormFeed.
10
Make sure the printer is online (Ready light is on solid). If it is
not, press Start/Stop until the Ready light is on solid. You are
now ready to print.
Chapter 4: Selecting and Loading Paper
69