Lexmark 4227 User Manual page 106

11
12
100
Chapter 5: Printer Options
Plug the Tractor 2 Feeder cable into the tractor connector on
the back of the printer.
Make sure the symbol ( ) on the Tractor 2 Feeder cable faces
up. Align the symbol (
the back of the printer above the tractor connector.
Tractor 2 Feeder Cable
Tractor Connector
Position the cable clamp flush with the bottom edge of the
printer and against the embossed edge, with the open section
facing upward.
Cable clamp
) on the cable with the ( ) symbol on
Embossed edge