d
e
8
Press Quit to exit the function menu.
Verifying Serial Interface Settings
1
On the operator panel, press Menu.
2
Press Item
3
Make sure that forms are loaded.
4
Press Start to print the current printer-function settings.
5
Press Item
6
Press Next
appears.
7
Press Store to save the selected value. An asterisk (*) appears
next to the selected value.
8
Press Quit to exit the function menu.
Press Store to save the setting. An asterisk (*) appears next
to the setting you selected.
Repeat steps a through d for each serial setting.
or Item
until Print Settings appears.
or Item
until the menu item you want appears.
or Prev.
until the setting value you want
Chapter 1: Getting Started
15