Draft document
Page/Form Layout Commands
Set All Tabs to Power On Setting
This command sets the horizontal tabs at every 8th column, beginning at column 9 (9,
17, 25, and so on) and clears all vertical tabs.
Format
ESC
R
Decimal
27
82
Hexadecimal 1B
52
USAGE NOTE
•
Set Horizontal Tabs
This command sets up to 28 tabulation stops to be used with the printer command HT,
Horizontal Tabulation.
Format
ESC
D
Decimal
27
680
Hexadecimal 1B
44
USAGE NOTES
•
•
•
•
•
•
To set user-defined tabulation stops, use printer command ESC D for
horizontal tabs and ESC B for vertical tabs.
n1
...
n28
0
n1
...
n28
0
n1
...
n28
00
Set the tabulation stops in ascending order (n1.....n28).
The last digit in the sequence must be 0 to terminate the command.
Horizontal tabs are specified by column number. The left most column is
numbered one.
ESC D 0 clears all existing horizontal tab stops.
ESC R (Set Default Tabulation Stops) resets to the default horizontal
tabulation stops.
The printer command HT, Horizontal Tabulation, activates the tabulation
stops set by this Escape sequence.
2-12
Page/Form Layout