Error Messages Troubleshooting - Lexmark X340 User Manual

Error messages troubleshooting

Problem
Change Media
Close Front Door
Load Manual
Load Media
USB Not Connected
QLINK Not Found
Digital Line Detected
No dial tone
Line Busy
No answer
Fax failed
Scanner Locked, Unlock
Scanner
31 Defective Print
Cartridge
32 Unsupported Print
Cartridge
33 Change Cartridge
Solution
Press 1 to change the size and/or type of media, or press 2 to ignore the
error message.
Note: To continue the job, press Start. To cancel the job, press Stop.
Close the front cover until it locks.
Load print media into the manual feeder. For more information, see
Loading paper in the manual feeder on page 32.
Load paper in the paper tray. For more information, see Loading paper
in the paper tray on page 28.
Check the USB connection at the MFP and at the computer.
Restart the computer.
If the error message still appears after restarting the computer:
1 Insert the Software and Documentation CD.
2 Install the QLINK software.
Make sure the MFP is connected to an analog telephone line.
Make sure cable connections for the following hardware are secure, if
applicable:
• Power supply
• Telephone
• Handset
• Answering machine
Check the telephone wall jack.
1 Plug a telephone into the wall jack.
2 Listen for a dial tone.
3 If you do not hear a dial tone, plug a different telephone into the jack.
4 If you still do not hear a dial tone,connect the printer to a different
telephone jack.
Place a test call to the telephone number to which you want to send a
fax to make sure that it is working correctly.
Resend the fax. If the fax still fails, see Cannot send or receive a fax
on page 89.
1 Open the top cover.
2 Move the switch to the left of the scanner glass to the unlock position.
Remove the defective toner cartridge, and install a new Lexmark toner
cartridge. For supplies information, see on page 69.

Error messages troubleshooting

91