Removing And Reinstalling The Drivers Software - Lexmark X340 User Manual

Removing and reinstalling the drivers software

If the software is not functioning properly or a communications error message appears, you may
need to remove and then reinstall the drivers software. If the problems persist, follow these steps:
Note: Before reinstalling, shut down and restart the computer.
1
Disconnect the USB cable from the computer.
2
From the desktop, click Start
3
Follow the instructions on the computer screen to remove the software.
4
Restart the computer.
5
If any Add New Hardware screens appear, click Cancel.
6
Eject and reinsert the software CD.
7
Reconnect the USB cable to the computer.
If the software installation screen does not appear:
1
From the desktop, double-click My Computer.
For Windows XP, click Start to access the My Computer icon.
2
Double-click the CD–ROM drive icon. If necessary, double-click setup.exe.
3
When the MFP software installation screen appears, click Install or Install Now.
4
Follow the instructions on the computer screen to complete the installation.
Programs Lexmark
Setup troubleshooting
74
Lexmark Software Uninstall.