Getting The Mfp Ready To Print And Scan; Installing The Software For Usb Attach - Lexmark X340 User Manual

12
Connect the power cord to a wall outlet.
13
Press the Power switch.

Getting the MFP ready to print and scan

Installing the software for USB attach

You can install printer drivers and scan software for the following operating systems using the
Software and Documentation CD:
• Windows 2003
• Windows 2003 x64
• Windows XP
• Windows XP x64
• Windows 2000
Note: Drivers for Windows XP x64 bit Edition are available at www.lexmark.com.
1
Insert the Software and Documentation CD.
2
Follow the instructions on the screen.
3
Connect the USB cable, and turn on the printer.
1
The Plug and Play screen appears, and a printer object is created in the printers folder of the
computer.
If the software installation screen does not appear:
1
From the desktop, double-click My Computer.
For Windows XP, click Start to access the My Computer icon.
2
Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
2
Getting the MFP ready to print and scan
12