Basic Wireless Setup - Cisco TES301 User Manual

Chapter 4 Configuring Advanced Settings

Basic Wireless Setup

Field
Basic Wi-Fi Setting at 2.4 GHz Band
Wi-Fi Network Mode
Wi-Fi Channel
Country
Bandwidth
Name(SSID)
Connection
SSID Broadcast
62
Description
From this drop-down menu, you can select the wireless
standards running on your network.

If you have both Wireless-B, Wireless-G and Wireless-N
(2.4GHz) devices in your network, keep the default setting,
Mixed.

If you have only Wireless-B devices, select Wireless-B
Only.

If you have only Wireless-G devices, select Wireless-G
Only.

If you have both Wireless-B and Wireless-G devices, select
Wireless-BG Mixed.

If you have only Wireless-N (2.4GHz) devices, select
Wireless-N Only.

If you do not have any Wireless-B, Wireless-G and
Wireless-N (2.4GHz) devices in your network, select
Disable.
For best performance in a network using Wireless-B, Wireless-
G and Wireless-N (2.4GHz) devices, select Auto. The default is
Auto.
Select the region from the drop-down menu.
Select Auto if you want the Gateway to automatically
determine the best bandwidth (20 MHz or 40 MHz).For best
performance, Auto is recommended.
The SSID is the network name shared among all points in a
wireless network. The SSID must be identical for all devices in
the wireless network. It is case-sensitive and must not exceed
32 characters (use any of the characters on the keyboard). Make
sure this setting is the same for all points in your wireless
network.
Select Enabled if you want the Wi-Fi Network enabled; selected
Disabled to disable the Wi-Fi Network.
When wireless clients survey the local area for wireless
networks to associate with, they will detect the SSID broadcast
by the Gateway. To broadcast the Gateway's SSID, keep the
default setting, Enable. If you do not want to broadcast the
Gateway's SSID, then select Disable.
4038767 Rev B