Connecting the Home Gateway
Perform the following steps to connect the TES301.
1
Make sure the power switch is in the Off position. Power down all devices that
you will connect to the gateway.
2
Insert a standard RJ-45 Ethernet cable (included) into the INTERNET port on the
gateway and connect the other end to your broadband network termination
device, such as a modem, router, GPON, or similar device.
Note: The illustrations in this guide show a modem connection as an example.
3
Insert a standard RJ-45 Ethernet cable into an Ethernet port on the gateway and
connect the other end to your PC.
4038767 Rev B
Connecting the Home Gateway
13