Reset To Factory Defaults; Set Language; Calibrate Touch Screen - Pandigital PAN8000DWPCF1 User Manual

Reset to Factory Defaults

Use this feature to restore function settings to the factory pre-set defaults.
Note: Wi-Fi network and photo sharing website connection settings will not be changed.
HOME
1. On the
2. Select
Reset to Factory Defaults

Set Language

This DPF includes multiple languages for the user interface display. Use this feature to change the
language at any time.
HOME
1. On the
Set Language
2. Select
3. The DPF will restart and then the user interface will be displayed in the selected language.

Calibrate Touch Screen

The first time you power on the DPF, a calibration will be performed to set the touch screen sensors.
Wait until the calibration is completed before touching the screen or pressing a key on the remote
control.
If for any reason your touch screen is not functioning correctly, perform a re-calibration to reset the touch
screen sensors.
Note: The most common reason for the need to re-calibrate is if you have changed your power adapter.
There are two methods available for performing a calibration:
Setup Menu
A. From the
HOME
1. On the
Calibrate Touch Screen
2. Select
3. Wait until the calibration is completed before touching the screen or pressing a key on the remote
control.
B. During a power-on
1. While pressing the
the button.
EXIT
2. Wait until the calibration is completed before touching the screen or pressing a key on the remote
control.
screen, touch or press
MENU
, and then select
screen, touch or press
MENU
, and then select the desired language.
screen
screen, touch or press
MENU
.
button on the unit's back top panel, power the DPF on, and then release
EXIT
Setup Menu
to display the
to reset, or
Yes No
Setup Menu
to display the
Setup Menu
to display the
screen.
to leave current settings.
screen.
screen.
41