Bluetooth Connection; Set Sleep Mode; Set Language; Reset To Factory Defaults - Pandigital PI1002DW User Manual

10.4” digital photo frame

User manual (52 pages)

User manual (67 pages)

Table of Contents

Available languages

B l u e t o o t h

C o n n e c t i o n

The Bluetooth feature allows you to download photos from popular Bluetooth-capable mobile phones (i.e., BlackBerry, Motorola, Nokia, SonyEricssson, and others)

directly into your DPF.

A Bluetooth USB Adapter is required (not included with DPF)

Note: Phone models vary and not all phones support transmitting photos to devices like a DPF. Check to be sure your phone supports transmitting photos to

external devices like DPF.

Insert Bluetooth Dongle

Insert your Bluetooth dongle into the DPF's USB host port and then turn on the DPF.

A popup window momentarily appears with the message "

Send Photo to DPF

From your Bluetooth device, search for available connection devices; select the

Select the desired photo and then send to the DPF.

Note: The actual procedure for sending photos to the DPF varies by mobile device manufacturer/model. Refer to your mobile device User Guide for

instructions.

During the photo transmission, "Photo Transmitting" appears on the DPF screen. When completed, the photo(s) will automatically be displayed in single

photo mode.

S e t S l e e p M o d e

The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode when left idle for a specific amount of time.

HOME

On the

screen, press

Set Sleep Mode

Select

OFF (default) = Power saver is 'disabled'; DPF will remain on until you power it off or change the sleep mode setting

2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the specified amount of time

Done

Select

S e t L a n g u a g e

Depending on model, this DPF may include multiple languages for the user interface display.

HOME

On the

screen, press

Set Language

Select

R e s e t t o F a c t o r y D e f a u l t s

If you have changed function settings, using this feature will restore settings to the factory pre-set defaults.

HOME

On the

screen, press

Reset to Factory Defaults

Select

EXIT

Press

to return to the

F r e q u e n t l y A s k e d Q u e s t i o n s

How do I set up my DPF?

It is very simple to get your Digital Photo Frame setup. Just plug the power adapter into the DPF and into a standard wall outlet, and then power it on. A slideshow will begin

displaying the images pre-loaded in the internal memory. To view your own photos, insert a memory card or USB flash drive into the appropriate card slot or USB port on the

Start Slideshow

side of the DPF. Select

What memory cards can the Digital Photo Frame Read?

Compatible memory cards include: Secure Digital™ (SD), Compact Flash (select models), MultiMedia Card™(MMC), xD Card, Memory Stick™(MS), MemoryStick Pro™, and

Memory Stick Pro Duo™.

I set up the Digital Photo Frame; why won't it turn on?

The power adapter may not be securely connected to the DPF or the power switch may not be in the ON position.

I have a memory card in the DPF; why can't I view my photos?

A) Be sure that the memory card is one of the formats listed above and that the files on the card are JPEG images files. Some digital cameras save images in other formats.

Refer to your camera's user guide if your photos are not JPEG files.

B) Make sure the memory card is inserted all the way into the card slot.

HOME

C) On the

screen, press

screen and then select the

Why is the photo display slower with some photos than others?

Higher resolution photos load more slowly. Try using lower resolution photos or down scaling your images. Refer to your camera's operating user guide for details on down

scaling your photos.

Setup Menu

to display the

, and then select the desired setting.

Setup Menu

to display the

, and then select the desired language.

Setup Menu

to display the

Yes

, and then select

HOME