Pantouch Clear Interface; Control Buttons On Dpf - Pandigital PAN8000DWPCF1 User Manual

Store Remote Control
Avoid misplacing the remote control by safely storing it on the back of the DPF when not in use.
The back of the remote control has a built-in magnet and the back of the DPF has a 'magnetic
area' so you can simply attach the remote control to the back of the DPF for safe keeping.
Replace the Remote Control Battery
1. Hold the remote control with the buttons facing down.
2. Push and hold the small release tab while pulling the battery tray out.
3. Replace the "CR2025" Lithium battery on the tray with the positive (+) side
facing up.
4. Push the tray back in until it clicks into place.

PanTouch Clear Interface

This DPF includes our
you to navigate through all the DPF features and functions.
The touch sensors are located strategically under the glass and are activated by simply touching the
screen. The navigation buttons appear for 5 seconds (without any user interaction), and then disappear
until you activate the interface again. While the PanTouch interface is active, the remote control will be
inoperable.
Throughout this User Guide, this hand icon depicts the specific use of the PanTouch Clear
interface.

Control Buttons on DPF

You can perform many (but not all) of the DPF functions by using the control buttons located on the top-
back panel of the DPF. Their basic functions are the same no matter when you use them.
Button Action
Scroll left
Select the highlighted option, start a Slideshow, Play and Pause
ENTER
Scroll right
technology, an on-screen touch icon-driven interface allowing
PanTouch Clear
Release tab
9